Denali DialDim Lighting Controller

Our ground-breaking DialDim™ Lighting Controller features amulticolor halo dimming switch that allows you to independently turn on/offand dim two sets of auxiliary lights from a single consolidated wiringharness. The LED halo switch displays your exact settings and allows foreffortless dimming on the fly. The blue halo controls light set one and thegreen halo controls light set two; simply double click to switch betweenthe two circuits.

The controller also features high beam, turnsignal, and horn inputs to unlock intelligent flash features that cancancel your aux lights with your turn signal, flash your aux lights as aturn signal, or strobe your lights when you sound yourhorn.

More Features, More Feedback!

Ourpatent-pending multicolor halo dimmer switch can do a whole lot more thanjust turn your lights on and off and dim them. For starters, it displaysthe exact intensity of both of your lights so you’re never stuck guessingif your lights are on, or what intensity they’re set to.

Thanksto the electronically fused circuits, the halo switch can also display, andallow you to select, the fuse values for each circuit. And if a fuse trips,the LED halo will turn red providing real-time feedback and allow forresetting the fuse.

Last but not least, the switch halo doublesas a battery monitor with a low-voltage cutoff feature. Our industry-firstdesign will flash different colors on startup to display your batteryhealth and automatically shut off your auxiliary lights if the batteryvoltage drops below 10.8 volts.

Features:

• ON/OFF &Dim – Independently control two sets of lights on/off andintensity level using the single DialDim™ Switch. The blue halocontrols light set one and the green halo controls light set two. Doubleclick to switch between the two circuits.
• High/LowSync – Your auxiliary lights will automatically switch betweenyour selected dim setting to full intensity with the factory high beamswitch. Simply connect the blue input wire to your vehicle’s high beamcircuit to enable this feature.
• Stealth Mode – Aclever 0% dim setting on the switch allows your lights to be “off” duringnormal driving conditions but will jump to 100% intensity with yourvehicle’s high beam switch. The lights will also react to turn signal andhorn inputs in this mode but will remain off when no inputs aredetected.
• Cancel with Turn Signal – When enabledthe main lights (blue circuit 1) will cancel in sync with your signal toprevent “washing out” your factory turn signal. Simply connect the yellowand orange input wires to your vehicle turn signal circuit to enable thisfeature.
• Flash as Turn Signal – When enabled youramber visibility lights (green circuit 2) will flash in sync with yourfactory turn signals. Simply connect the yellow and orange input wires toyour vehicle turn signal circuit to enable thisfeature.>
• Strobe with Horn – When enabled yourauxiliary lights on both circuits will strobe at 4Hz when you sound yourhorn. Simply connect the green input wire to your vehicle horn circuit toenable this feature.
• Electronically Fused Circuits– Both light circuits are electronically fused and can be set right fromthe switch itself! The halo will illuminate red to notify you when acircuit fused is tripped.
• Voltage DisplayIndicator – Upon vehicle startup, the switch halo will flash greento indicate a healthy battery voltage, or flash red to indicate a batteryvoltage that is below 11.8v.
• Low Voltage Cutoff -If the battery voltage drops below 10.8v the lights will not power onpreventing you from being stranded. The switch halo will flash 4 red LEDsto indicate the low voltage condition.

ProductSpecs:

• Two fully independent lightcircuits
• Eight intensity levels per circuit (5%, 15%, 30%, 45%,60%, 75%, 100%)
• Eight electronic fuse values (1A, 2A, 4A, 6A, 8A,10A, 15A, 20A)
• Five feature input wires (ignition, high beam, horn,left turn, right turn)
• 20A max per circuit (30A maxcombined) 
• Operating Voltage: 12VDC

What’s In The Box?

• (1x)DialDim™ Controller Harness
• (1x) DialDim™Multi-function Switch
• (1x) 7/8″ Handlebar Switch Mount
• (4x)66″ Plug-&-Play Light Extensions
• (1x) Universal Input TriggerWire Harness